(Compatible article numbers 24970)

How to install GXT 612 Cetic Bluetooth® Gaming Speaker Set Installation steps for wired connection

Connection for power

For power connect the speaker set Cetic to a free USB-A port of the computer or to a USB-A charger that is connected to a wall power outlet.

Connection for audio

For audio, connect the speaker set aux cable to the audio-port of the computer.

How to connect the speaker set via Bluetooth

If you long press the power button, then you will break the previous Bluetooth connection. This will allow you the possibility to pair and connect the speaker set Cetic to a different device.
 You will hear a  short ‘’beep’’ sound when the wired connection is active and you will hear a ‘’beep, beep, beep’’ longer sound when the Bluetooth connection is active.

Go to the Bluetooth section of the device you are pairing to and select the TRUST GXT Speaker to pair.

Switching between the two connection modes

You can switch back and forth from Bluetooth to wired connection by pressing the power button.

How the lighting of the speaker set works

Press the button located on top of the right speaker to switch on the light.

Long press on that button to turn off the light.

It is also possible to regulate the volume by turning the power button.