(Compatible article number 25337)
Step-by-Step Assembly Instructions
Components Included
Tools Required
- Screwdriver
- Allen Key (included)
Desk Clamp Installation
Prepare the Desk Clamp
- Attach the desk clamp (part D) to the edge of the desk. Ensure the desk thickness does not exceed 70mm.
- Tighten the clamp using the large screw to secure it to the desk.
Arm Assembly
Attach the Arm to the Desk Clamp
- Insert the lower section of the arm assembly into the clamp.
- Secure the arm with the provided screws. Use the 5mm Allen key to tighten.
Monitor Arm Installation.
- Slide the arm onto the installed pole.
- Tighten the arm to the pole using the M6x12 screws and the 3mm Allen key.
Attach the Monitor
- Align the VESA mount holes on the back of the monitor with the holes on the arm bracket.
- Secure the monitor using the M4x10 screws. Use a Phillips head screwdriver.
Attach the Laptop Tray
- Connect the laptop tray (part 4) to the arm using the M4x12 screws (part 8).
- Tighten the screws using a Phillips head screwdriver.
Adjust the Arm and Monitor
- Ensure all screws are tightly secured.
- Adjust the arm and monitor to the desired height and angle. Use the Allen keys as needed for fine adjustments.
Option
Option
Optional Cable Management
Organize Cables. Use the built-in cable management clips to organize and route the cables along the arm for a clean setup.
Usage Notes
- Ensure the maximum weight of the monitor does not exceed 32" or 8kg.
- Regularly check the screws and connections for tightness to maintain stability.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article