PCS-221 2.1 Subwoofer Speaker Set - 20581

Downloads



Manuals

Quick Manuals
Download

Quick Manuals
Download


Datasheets

Datasheets
Download


CE Document

Legal & Compliance Information
Download

EU Declaration of Conformity (DoC)
Download

FAQ

  • Subwoofer is not working.

    Make sure the subwoofer volume knob is turned up (not set to zero). Check cable connections of subwoofer. Check connection of speaker to soundcard; (colors of connectors must match colors connectors PC-side)

  • My speaker set (with smart power management) stops working after some time, what is happening?

    After a period of no sound, your speaker set has entered a power saving mode in order to preserve energy. When you play music again, the speaker; set will automatically resume playing as usual. Please note that some computers won let attached devices resume from standby-mode due to configuration, the speaker set then has to be switched on manually.

  • My product is faulty. What do I do?

    We offer a 'return to retailer' warranty on our products. In case of a defect, you can return the product to your retailer with failure description, proof of purchase and all accessories. During the warranty period you will receive a replacement product from the retailer if available. For full warranty conditions you can consult: https://www.trust.com/support/warranty

  • What is the average time before the speaker enters its power saving mode?

    After about 60 minutes of no sound (silence) the speaker enters its power saving mode.

  • How can I make sure my speaker does not enter its power saving mode unintentionally?

    Increase the volume of the source (computer, laptop, tablet, smartphone, etc) and decrease the volume of the speaker to the desired volume.

  • How long does it take for the speaker to resume playback once It's in its power saving mode?

    When resuming the audio playback it takes about 1-2 seconds before the speaker is active again. Please note that some computers won't let attached devices resume from standby-mode due to configuration, the speaker then has to be switched on manually.

  • What is the Eco design directive about? (Also called ErP II)

    ErP is a legislation from the EU, setting eco requirements to Energy Related Products. These requirements are intended to reduce (standby) power consumption and in general reduce energy losses.

  • Where is your service center? Or where can I send my product to be repaired?

    Unfortunately, we do not have service centers to repair products. A defective product should be replaced by your point of purchase during the warranty period.

  • One of the speakers is not working. What can I do?

    We recommend to test the speakers first, by switching the left/right output of the subwoofer. Furthermore, it is advised to check if the problem is related to the subwoofer output or to the speaker itself.

  • How can I improve the sound of the speaker?

    If you wish to improve the sound of your speaker set we advise: 1. Check the volume level: adjust the volume level on your speakers 2. Check audio cable and port: switch to another port or cable 3. Update audio drivers by downloading and installing the latest audio drivers from the website of the computer's manufacturer. 4. Check that the power source doesn't interfere with the audio 6. Prevent frequency interference from other devices (including USB-devices on the same computer) 7. Tweak your audio settings: Start Control Panel Hardware and Sound Sound Playback right-click on your speaker Properties

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article